Close-Couple Centrifugal Pumps, Horizontal,Vertical Pumps, California

Price Pump_®

Close Coupled Horizontal and Vertical Centrifugal Pumps
Flows to 160 GPM (606 LPM) / Heads to 100 feet (30 meters)


Sizes : CD100-1" x 1-1/4" x 5" CD 150-1-1/2" x 2" x 5"

Materials:

316 Stainless Steel
Cast Iron
All Bronze
Cast Iron/Bronze Fitted Impeller

Applications:

Industry-Chemical process, deionized water, wastewater treatment, hot solvents, and caustics
O.E.M. - Washers, filters, chillers, cooling towers, scrubbers, plating equipment
Agriculture-Acid fertilizers and other agricultural chemicals

Features:

Close Coupled design using standard NEMA 56C motors
Optional power frame available
Mechanical seal: JohnCrane 5/8" Type 21 Fluorocarbon standard, Type 9 PTFE and Type 21 Fluorocarbon double seal available
Optional seal face materials and elastomers available
Seal flush and seal quench optional

Technical Information:

Category	CD100	CD150
Minimum Recommended Flow - GPM (LPM)	12 (45)	25 (9.4)
Max. Working Pressure(CD100SS/CD100AI) - psi - (bar)	150/75 (10/5)	150/75 (10/5)
Maximum Solid Size(CD-AB) - inch (mm)	0.15 (3.8)	0.15 (3.9)
Max. Temperature(CD-SS/CD-AI) - °F (°C)	300°F (149°C)	300°F (149°C)

Materials of Construction:

Part	AI	BF	SF	AB	SS

Volute	C.I.	C.I.	C.I.	Bronze	316SS
Bracket	C.I.	C.I.	C.I.	Bronze	316SS
Impeller	C.I.	Bronze	316 SS	Bronze	316SS
Fasteners	Plated Steel	Plated Steel	Plated Steel	18-8SS	316SS
Gasket	Syn. Fiber(CD100)	Syn. Fiber(CD100)	Syn. Fiber(CD100)	N/A	PTFE(CD100)
O-Ring*	CD150	CD150	CD150	CD100/150	CD150
Shaft	316SS	316SS	316SS	316SS	316SS

* O-Ring Material is the same as Seal-Elastomer.

Close Coupled Horizontal and Vertical Centrifugal Pumps
Flows to 400 GPM (1514 LPM) / Heads to 75 feet (23 meters)

Sizes :

RC200-2" x 2" x 4"
RC300 -3" x 3" x 4-1/2"
RC200V -2" x 2" x 4"
RC300V -3" x 3" x 4-1/2"

Materials:

RC AI (All Iron)
RC BF (Bronze Fitted)

Applications:

Industry- Aquaculture, Coolant pumps and cold water circulating pumps, Chemical transfer pumps, Cooling Tower pumps
O.E.M.- Circulating Washers, Machine tool coolants

Features:

Compact close coupled design.
Motors are standard NEMA 'C' face design with ball bearings.
Single and three-phase are available in Drip Proof, Totally Enclosed or Explosion Proof design.
Up to 5hp in three-phase DP or TE, and up to 3hp in three-phase XP.
Semi-open, high efficiency Francis type impeller.
Mechanical seal: 5/8" Type 6A Buna, carbon vs. ceramic, single seal standard
Fluorocarbon Type 21 and PTFE Type 9 single seals optional.Other seal faces and
elastomers available.
Double Type 21 Fluorocarbon, neoprene or EPR seals optional
Seal flush and seal quench optional
Optional Power Frame available

Vertical Features:

Sealless construction
Carbon bushing standard, glass filled PTFE optional
Standard column length is 13" (33cm) in cast iron construction. For longer lengths the RC-V series offers a
13" (33cm), 20" (50cm), 32" (81cm), and 44" (112cm) column in cast iron or 316SS.

Type RC-V

Technical Information
	Category	RC200V	RC300V
	Minimum Recommended Flow - GPM (LPM)	10 (38)	50 (189)
	Minimum Immersion (measured from end of suction) - inch (cm)	8-18 (21)	8-3/4 (22)
	Maximum Immersion (measured from bottom of motor) - inch (cm)	5-1/8 (13)	5-1/8 (13)
	Maximum Solid Size - inch (mm)	0.38 (10)	0.38 (10)
	Maximum Temperature - °F (°F)	300°F (149°C)	300°F (149°C)
	Maximum Suction Pipe Extension - feet (meters)	3 (0.9)	3 (0.9)

Contact Factory for higher Temperature options

Materials of Constuction
		AI	BF
	Volute	Cast Iron	Cast Iron
	Column	Cast Iron or Stainless Steel	Cast Iron or Stainless Steel
	Impeller	Cast Iron	Bronze
	Fasteners	Plated Steel	Plated Steel
	Gasket	Synthetic Fiber	Synthetic Fiber
	Bushing	Carbon Graphite	Carbon Graphite
	Fume Barriers	Viton® or Teflon®	Viton® or Teflon®
	Shaft	316SS	316SS

Close Coupled Multi-Stage Horizontal Centrifugal Pump
Flows to 20 GPM (76 LPM) / Heads to 380 feet (116 meters)


Sizes : MS50-1/2" x 3/4" x 4"

Materials:

MS50 (316SS)

Applications:

Deionized water system
Ultrafiltration systems
Cooling pumps for laser systems
Reverse osmosis systems
Acid handling

Features:

Standard NEMA 56C motor
Mechanical seal: 5/8" Type 21 Fluorocarbon, carbon vs. ceramic standard. Type 9 PTFE and Type 21 Fluorocarbon double seal optional
Seal flush and seal quench optional
Optional power frame available
Standard bushings are graphite, with glass filled PTFE optional
Standard "O"-rings are Fluorocarbon with EPR, neoprene or PTFE optional

Technical Information
	Category	MS50-SS
	Minimum Recommended Flow - GPM (LPM)	1/2 (1.9)
	Maximum Solid Size - inch (mm)	0.03" (0.8)
	Maximum Working Pressure - psi (bar)	200 (14)
	Maximum Temperature - °F (°C)	300°F (149°C)

With Standard seal and gasket, temperature will vary with the liquid being pumped. Contact the factory for higher temperature and pressure options.

Materials of Construction
	Volute	316 Stainless Steel
	Impeller	316 Stainless Steel
	Bracket	316 Stainless Steel
	Shaft Sleeve	316 Stainless Steel
	Fasteners	316 Stainless Steel
	Gasket	Viton® "O"-Rings

Close Coupled Horizontal and Vertical Centrifugal Pumps
Flows to 12 GPM (45 LPM) / Heads to 48 feet (15 m)

Sizes :

LT25-1/4" x 1/2" x 3"

Materials:

LT25AB (All Bronze)
LT25SS (316SS)

Applications:

Vapor degreasers
Chillers
Filter systems
Water
Solvents
Water Treatment systems
Various industrial chemicals
Freon
Alkaline Solutions
Deionized Water

Features:

Compact close coupled design
NEMA 42C face motor, optional power frame available
Mechanical seal: 5/8" Type 21 Fluorocarbon, carbon vs. ceramic standard
Type 9 PTFE, Type 21 double seals, silicon carbide faces are among the many seal options available from stock.
Seal flush and other options available

Vertical Features:

Sealless construction
Carbon bushings standard, glass filled PTFE optional
Standard column lengths 7-1/2" (19cm), 13" (33cm) and 20" (50cm)
Available in 316SS

Technical Information
	Category	LT25AB	LT25SS
	Minimun Recommended Flow - GPM (LPM)	1/2 (1.9)	1/2 (1.9)
	Maximum Solid Size - in (mm)	0.12 (3)	0.12 (3)
	Maximum Working Pressure - psi (bar)	200 (14)	200 (14)
	Maximum Temperature - °F (°C)	300°F (149°C)	300°F (149°C)

With Standard seal and gasket, temperature will vary with the liquid being pumped. Contact the factory for higher temperature and pressure options.

Materials of Construction
		LT25AB	LT25SS
	Volute/Bracket	Bronze 85-5-5-5	316 SS
	Impeller	Bronze 85-5-5-5	316 SS
	Bracket	Bronze 85-5-5-5	316 SS
	Shaft	316 SS	316 SS
	Fasteners	18-8 SS	316 SS
	Gasket	Synthetic Fiber	Teflon®

Close Coupled Horizontal and Vertical Centrifugal Pumps
Flows to 300 GPM (1136 LPM) / Heads to 125 feet (38 meters)


Sizes: CL150 - 1-1/2" x 2" x 5.75"

Materials:

CL-SS 316 SS

Applications:

Scrubbers
Filters
Washers
De-Ionized Water
Acids
Alkalis
Glycols
Solvents
Caustics
Reverse Osmosis

Features:

Compact close coupled design using standard NEMA "C" OR "TC" motors
Back pull-out design for easy maintenance
Optional O-ring design available
316SS - John Crane Type 21 Viton®, Carbon vs. Ceramic, standard seal
John Crane Type 9 Teflon® seal available
Optional seal face materials include Ni resist, tungsten carbide and silicon carbide
Seal flush optional

Technical Information
	Minimum Recommended Flow - GPM (LPM)*	40 (151)
	Maximum Working Pressure - psi (bar)	150 (10)
	Maximum Temperature - °F (°C)	300°F (149°C)
	Maximum Solid Size - inch (mm)	0.15 (3.8)
	*With Maximum impeller Diameter

Materials of Construction
Volute/Bracket	316 Stainless Steel
Impeller	316 Stainless Steel
Bracket	316 Stainless Steel
Sleeve	316 Stainless Steel
Fasteners	316 Stainless Steel
O-Ring	Match Seal Elastomer

Close Coupled Closed-Impeller Horizontal Centrifugal Pump
Flows to 400 GPM (1514 LPM) / Heads to 136 feet (41 meters)

Sizes :

XL100-1" x 1-1/2" x 6"
XL150-1-1/2" x 3" x 6"
XL200-2" x 3" x 6"
XT100-1" x 1-1/2" x 6"
XT150-1-1/2" x 2" x 6"
XT200-2" x 3" x 6"

Materials :

XL (Centerline Flanged) (316SS only)
XT (Tangential Threaded) (316SS, Cast Iron, and All Bronze and Cast Iron Bronze Fitted)

Applications :

Industry-Chemical process, Deionized water, Water and wastewater treatment, Hot solvents, Caustics
OEM-Washers, Filters, Chillers, Cooling towers, Scrubbers, Plating equipment
Agriculture-Acid Fertilizers and other agricultural chemicals

Features: :

Standard NEMA JM motors; ODP, TEFC, XP... 56C also available
Mechanical seal: 1-1/2" Type 21 Fluorocarbon, carbon vs. ceramic standard. Type 9 PTFE and Type 21 Fluorocarbon double seal optional
Seal flush and seal quench optional
Optional power frame available
Close coupled through -- horsepower
Replaceable shaft sleeve
150 lb. centerline ANSI dimensioned flanges
Available NPT connections

Technical Information
		XT/XL100	XT/XL150	XT/XL200
	Minimum Recommended Flow - GPM (LPM)	10 (38)	35 (132)	50 (189)
	Maximum Solid Size - inch (mm)	0.12 (3)	0.19 (5)	0.25 (6)
	For All XL/XT Type Pumps:
	Max. Working Pressure - psi (bar)	200 (14)
	Max. Temperature - °F (°C)	300°F (149°C)
Temperature limit will also vary according to liquid pumped. Contact factory for higher Pressure/Temperature options.

Close Coupled Horizontal and Vertical Centrifugal Pumps
Flows to 1100 GPM (4165 LPM) / Heads to 300 feet (91 meters)


Sizes: XJ100-1" x 1-1/2" x 8" XJ150-1-1/2" x 3" x 8" XJ200-2" x 3" x 8" XJ400-4" x 4" x 8.5" JB100-1" x 1-1/2" x 8" JB150-1-1/2" x 2" x 8" JB200-2" x 3" x 8"

Materials:

XJ (Centerline Flanged) 316 Stainless Steel
JB (Centerline Threaded) 316 Stainless Steel

Applications:

Industry-Chemical process, Deionized water, Water and wastewater treatment, Hot solvents, Caustics
OEM-Washers, Filters, Chillers, Cooling towers, Scrubbers, Plating equipment
Agriculture-Acid Fertilizers and other agricultural chemicals

Features:

Standard NEMA JM motors; ODP, TEFC, XP are also available
Mechanical seal: 1-1/2" Type 21 Fluorocarbon, carbon vs. ceramic standard. Type 9 PTFE and Type 21 Fluorocarbon double seal optional
Seal flush and seal quench optional
Optional power frame available
Close coupled through 40 horsepower
Replaceable shaft sleeve
150 lb. centerline ANSI dimensioned flanges
Available NPT connections

Technical Information:
	Category	XJ/JB 100	XJ/JB 150	XJ/JB 200	XJ400
	Min. Recommended Flow - GPM (LPM)	20 (75)	40 (151)	90 (340)	100 (378)
	Max. Solid Size - inch (mm)	0.12 (3)	0.25 (6)	0.44 (11)	0.44 (11)
	For All Types X Pumps:
	Max. Working Pressure - psi (bar)	200 (14)			150 (10)
	Max. Temperature - °F - (°C)	300°F (149°C)			300°F (149°C)

Temperature limit will also vary according to liquid pumped. Contact factory for higher Pressure/Temperature options.

To view the XJ400 model in more detail, go to the XJ400 Web Page.

Close Coupled Closed-Impeller Horizontal Centrifugal Pump
Flows to 1100 GPM (4164 LPM) / Heads to 300 feet (91 meters)


Sizes: XJ400-4" x 4" x 8.5" Impeller Trim Available 6"-8.5"

Materials:

XJ400 - 316 Stainless Steel

Applications:

Industry-Chemical process, Deionized water, Water and wastewater treatment, Textile Dyeing, Caustics
Acid Mine Drainage, Cooling towers, Scrubbers, Oil Field Brine
Frac Water Treatment, Agriculture-Chemical processing, Irrigation/Fertilization
Municipal Water Treatment, Liquid Transfer

Features:

Standard NEMA JM motors; ODP, TEFC, XP...
Mechanical seal: 1-1/2" Type 21 Fluorocarbon, carbon vs. ceramic standard, optional Type 2
Close coupled through 100 horsepower
Replaceable shaft sleeve
150 lb. ANSI flanges
Seal Flush Options Available

Technical Information: >

		XJ400
	Min. Recommended Flow Rate - GPM (LPM)	100 (379)
	Max. Solid Size - inch (mm)	0.44 (11)
	Max. Working Pressure - psi (bar)	150 (10) - 300 (20) w/Type 2 Seal
	Max. Temperature - °F (°C)	350°F (177°C)

Temperature limit may vary according to liquid pumped. Contact factory for higher Pressure/Temperature options.

Close Coupled Self Priming Horizontal Centrifugal Pump
Flows to 150 GPM (568 LPM) / Heads to 95 feet (29 meters)


Sizes: SP150-1-1/2" x 1-1/2" x 4-3/4"

Materials:

SP150 AI (Cast Iron)
SP150 SS (316SS)
SP150 SF (Cast Iron-Stainless Fitted)

Applications:

Ground water remediation
Chemical sump pumps
Filters
Wastewater treatment
Chemical transfer
Dewatering
Pumping solvents
Agricultural

Features:

Compact close coupled design
Standard NEMA 56C motor
Mechanical seal: 3/4" Type 21 Buna, carbon vs. ceramic standard on cast iron pumps; 3/4" Type 21 Fluorocarbon, ceramic vs. carbon is standard on 316SS pumps
Self priming pump
Optional seal face materials and elastomers available
Semi-open impellers
Seal flush available
Optional power frame available
Back pull out design

Technical Information

Minimum Recommended Flow - GPM (LPM): 10 (38)

Maximum Solid Size - inch (mm): 0.06 (1.5)

Maximum Temperature - °F (°C): 300°F (149°C)

Priming Times (minutes/seconds) Suction Lift - feet (meters)
Model#	Impeller Size	5 (1.5)	10 (3)	15 (4.5)	20 (6)
SP150-42507	4.25/.07	1:30	3:45	6:30	12:25
SP150-46312	4.63/12	1:00	2:25	5:25	10:00
SP150-47525	4.75/.25	0:38	1:15	2:48	6:15
SP150-47550	4.75/.50	0:20	0:35	1:05	2:25

For all other impeller sizes interpolate to achieve approximate priming times.

Materials of Construction
		SP150AI	SP150SS	SP150SF
	Volute/Diffuser	Cast Iron	316SS	Cast Iron
	Impeller	Cast Iron	316SS	316SS
	Bracket	Cast Iron	316SS	Cast Iron
	Gasket	Synthetic Fiber	Teflon®	Synthetic Fiber
	Shaft	316SS	316SS	316SS
	Fasteners	316SS	316SS	316SS

Close Coupled Plastic Horizontal Centrifugal Pump
Flows to 60 GPM (227 LPM) / Heads to 160 feet (49 Meters)


Sizes : OH75 -3/4" x 1" x 6"

Materials:

OH75 CP (Natural CPVC)
OH75 PF (Natural PVDF)

Applications:

Sump Pumping
Electronics
Photo Processing
Water Treatment
Acid transfer
Chillers
Metal etching
Recirculating

Features:

All non-metallic wetted parts
True volute design for high efficiency and better performance
Compact close coupled design
Standard NEMA 56C motors
Optional power frame available
Unique sleeved impeller design
Mechanical seal: 1" Type 36 Fluorocarbon non-metallicseal standard
Optional seals available
Optional Seal Flush

Technical Information
	Category	CPVC	PVDF
	Minimum Recommended Flow - GPM (LPM)	7 (27)	7 (27)
	Maximum Solid Size - inch (mm)	0.15 (3.8)	0.15 (3.8)
	Maximum Working Pressure - psi (bar)	125 (8.6)	125 (8.6)
	Temperature Range - °F (°C)	0°-140°F (-18°C-60°C)	-20°-260°F (-29°C-127°C)

With standard Seal and Gasket,Temperature limit will also vary according to liquid pumped.
Contact Factoryfor higher Pressure/Temperature options.

Materials Of Construction
	Volute	CPVC	PVDF
	Impeller	CPVC	PVDF
	Bracket	CPVC	PVDF
	Fasteners	316SS	316SS
	Gasket	Viton®	Viton®
	Shaft	CPVC	PVDF

Close Coupled Plastic Horizontal Centrifugal Pump
Flows to 48 GPM (174 LPM) / Heads to 118 feet (129 Meters)


Sizes : RP75 -3/4" x 3/4" x 5.12"

Materials:

RP75 NN

Applications:

Sump Pumping
Electronics
Photo Processing
Water Treatment
Acid transfer
Chillers
Metal etching
Recirculating

Features:

All non-metallic wetted parts
True volute design for high efficiency and better performance
Compact close coupled design
Standard NEMA 56C motors
Optional power frame available
Unique sleeved impeller design
Mechanical seal: 1" Type 36 Fluorocarbon non-metallic seal standard

Technical Information
	Category	NN
	Minimum Recommended Flow - GPM (LPM)	4 (16)
	Maximum Solid Size - inch (mm)	0.15 (3.8)
	Maximum Working Pressure - psi (bar)	125 (8.6)
	Temperature Range - °F (°C)	0°-140°F (-18°C-60°C)

With standard Seal and Gasket,Temperature limit will also vary according to liquid pumped.
Contact Factoryfor higher Pressure/Temperature options.

Materials Of Construction
	Volute	NN
	Impeller	CPVC
	Bracket	NN
	Fasteners	316SS
	Gasket	Viton®
	Shaft	CPVC

Close Coupled Horizontal and Vertical Centrifugal Pumps
Flows to 70 GPM (265 LPM) (316SS or Bronze Impeller)/ Heads to 160 feet (49 meters)
Flows to 20 GPM (76 LPM) (CPVC Impeller) / Heads to 160 feet (49 meters)

Sizes :

HP75 - 3/4" x 3/4" x 6"
HP100 - 1.0" x 1.0" x 6"

Materials :

HP75 Series

HP75BN (Bronze)
HP75BS (Bronze with Stainless Steel impeller)
HP75KN (Kanigen Plated)
HP75KS (Kanigen Plated with Stainless Steel impeller)
HP75CN (CPVC)
HP75CS (CPVC with Stainless Steel impeller)
HP75SS (316 Stainless Steel)
HP75SC (316 Stainless Steel body / CPVC impeller)
HP75NN (Noryl body with CPVC Impeller)

HP100 Series

HP100AB (Bronze)
HP100BS (Bronze with Stainless Steel impeller)
HP100SS (316 Stainless Steel)
HP100SC (316 Stainless Steel body / CPVC impeller)

Applications :

Industry- Circulating chilled water, Booster pumps, Sprinkler pumps, Deionized water
OEM- Booster pumps, Chiller pumps for various uses, Air conditioning, Laser coolers

Features:

Standard NEMA 56J motors
Bronze volute, Electroless Nickel Plated volute, CPVC molded volute, or Stainless Steel Volute and Bracket
Compact size
Mechanical seal: 5/8" Type 6 Buna, carbon vs. ceramic standard
Molded CPVC, Bronze or 316SS impellers available on all models

Technical Information:

		HP100BS					HP100SS	HP100SC	HP100AB
Category	HP75BN	HP75BS	HP75KN	HP75KS	HP75CN	HP75CS	HP75SS	HP75SC	HP75AB	HP75NN

Minimum Recomended Flow - GPM	1/2	1/2	1/2	1/2	1/2	1/2	1/2	1/2	1/2	1/2
Flow - (LPM)	(1.9)	(1.9)	(1.9)	(1.9)	(1.9)	(1.9)	(1.9)	(1.9)	(1.9)	(1.9)
Maximum Solid Size - in	0.03	0.03	0.03	0.03	0.03	0.03	0.03)	0.03	0.03	0.03
(mm)	(0.8)	(0.8)	(0.8)	(0.8)	(0.8)	(0.8)	(0.8)	(0.8)	(0.8)	(0.8)
Maximum Pressure Seal Type 6 - psi (bar)	75 (5)	75 (5)	75 (5)	75 (5)	75 (5)	75 (5)	---	---	---	40 (2.8)
Seal Type 21 - psi (bar)	150 (10)	150 (10)	150 (10)	150 (10)	150 (10)	150 (10)	150 (10)	150 (10)	150 (10)	40 (2.8)
Maximum Temperature-°F	140°F	300°F	140°F	300°F	140°F	140°F	300°F	140°F	300°F	140°F
(°C)	(60°C)	(149°C)	(60°C)	(149°C)	(60°C)	(60°C)	(149°C)	(60°C)	(149°C)	(60°C)

With standard Seal and Gasket, Temperature limit will also vary according to liquid pumped.
Contact Factory for higher Pressure/Temperature options.

Materials of Construction:

		HP100BS					HP100SS	HP100SC	HP100AB
Category	HP75BN	HP75BS	HP75KN	HP75KS	HP75CN	HP75CS	HP75SS	HP75SC	HP75AB	HP75NN

Volute	Bronze	Bronze	Kanigen Plated	Kanigen Plated	CPVC	CPVC	316SS	316SS	Bronze	Noryl
Impeller	CPVC	316SS	CPVC	316SS	CPVC	316SS	316SS	CPVC	Bronze	CPVC
Bracket	Cast Iron (Bronze Option)	Cast Iron (Bronze Option)	Cast Iron	Cast Iron	Cast Iron	Cast Iron	316SS	316SS	Cast Iron (Bronze Option)	Noryl
Fasteners	18-8SS	18-8SS	18-8SS	18-8SS	18-8SS	18-8SS	18-8SS	18-8SS	18-8SS	Steel-Zinc Plated
Gasket	EPR	EPR	Viton®	Viton®	EPR	EPR	---	---	---	---
O-Ring	---	---	---	---	---	---	Viton®	Viton®	Viton®	Buna

Close Coupled Horizontal Centrifugal Pump
Flows to 25 GPM (95 LPM)/ Heads to 54 feet (16 meters)


Sizes: F50 - 1/2" x 3/4" x 4" F75 - 3/4" x 1" x 4" F95 - 1" x 1-1/4" x 4"

Materials:

F50 AI (Cast Iron)
F50 AB (All Bronze)

Applications:

Air Conditioning
Washing Machines
Carpet Cleaners
Bilge Pumps
Wash Down
Circulating Pumps
Coolant Pumps
Brine Circulation

Features:

Compact close coupled design
Standard NEMA 56J motor
Mechanical seal: 5/8" Type 6A Buna, carbon vs. ceramic standard

Technical Information
	Category	F-AI	F-BF	F-AB
	Minimum Recommended Flow - GPM (LPM)	5 (19)	5 (19)	5 (19)
	Maximum Solid Size - inch (mm)	0.15 (3.8)	0.15 (3.8)	0.15 (3.8)
	Maximum Working Pressure - psi (bar)	75 (5)	75 (5)	75 (5)
	Maximum Temperature - °F (°C)	200 (93 °C)	200 (93 °C)	200 (93 °C)

With Standard seal and gasket, temperature will vary with the liquid being pumped. Contact the factory for higher temperature and pressure options.

Materials Of Construction
	Part	F-AI	F-BF	F-AB
	Volute	C.I.	C.I.	Bronze
	Bracket	C.I.	C.I.	Bronze
	Impeller	C.I.	Bronze	Bronze
	Fasteners	Plated Steel	Plated Steel	18-8SS
	Shaft	416SS	416SS	416SS
	Gasket	Synthetic Fiber	Synthetic Fiber	Synthetic Fiber

US unit documentation	Metric unit documentation
Performance Curves:	Performance Curves:

Outline Drawings:	Outline Drawings:

Parts List:

I & O Manuals:

Technical Data Sheets:

Back to the Thumbnails

First Name *
Last Name *
Company Name
Email *
Phone *
City
State
Zip Code
	Next Step Close

First Name *
Last Name *
Company Name
Email *
Phone *
City
State
Zip Code
	Type Number and then Submit:
	Close

Get a quote from Price^® Pump!

Get information about Price Pump

US unit documentation

Metric unit documentation

Performance Curves:

Performance Curves:

Outline Drawings:

Outline Drawings:

Parts List:

I & O Manuals:

Technical Data Sheets:

Flow
Head
What are you pumping
Application details / Notes
	Close

Get a quote from Price® Pump!

Get information about Price Pump

US unit documentation

Metric unit documentation

Performance Curves:

Performance Curves:

Outline Drawings:

Outline Drawings:

Parts List:

I & O Manuals:

Technical Data Sheets:

Get a quote from Price^® Pump!